• 24Hours Hot-line:86-0319-3989516

    News Center Technical data

    新聞動態PRODUCTS CENTER

    How did 4 wheel tractor disorderly stall do

    From:Xingtai First Tractor Manufacturing Co., Ltd.Date:2019/7/5 17:51:07

    How did 4 wheel tractor disorderly stall do? Hao ran intelligent agricultural machinery manufacturing small series teach you the method.

    1. Put two and reverse gears at the same time. On the left side of the gearbox reverse fork shaft above the empty, screw out a bolt to tighten the bearing cover (M8x25), with a length of about 180 mm, diameter of 4 mm round steel into the bolt hole, aiming at the fork a little hard push, when the gear back into neutral position.

    2, and then take off the 2 gear, in the clutch - side of the transmission box under the oil hole, screw out a bolt to tighten the transmission box (M10x85), with the above specification of a round steel on the 2 gear, 3 gear fork, a little hard push, you can put the 2 gear back into neutral position.

    3. Put both third and first gear on. Remove 3 gear, to remove in the above first hole, remove 1 gear, to remove in the above transmission box oil hole below the screw hole, the specific operation method is the same as before.

    CONTACT US

    Hebei Haoran Intelligent Agricultural Machinery Manufacturing Co., Ltd.

      • 24-hour service hotline:86-0319-3989516
      • Sales calls:13930970993(Manager Duan)
      • Address:Longgang Development Zone, Xingtai County, Xingtai City, Hebei Province, China.
      • Email:xtsales@163.com
      • Fax:86-0319-3989518
    亚洲风情在线